Concrete for a 10×36 slab

4.44 cubic yards (220 × 80 lb bags)

for a 10×36 ft slab 4 inches thick: 120 cu ft. Bag counts include 10% extra; at 6 inches you need 6.67 yards.

A 10×36 foot slab covers 360 square feet. At the standard 4 inch thickness for a patio, walkway or shed floor, that is 120 cubic feet of concrete, or 4.44 cubic yards. At this size ready-mix is cheaper and far less work than bags: about 5 yards, roughly $825 before delivery fees, against $1,430 for 220 bags of 80 lb mix.

Concrete for a 10×36 slab by thickness

ThicknessCubic yardsCubic feet80 lb bags60 lb bags40 lb bags
3 in3.3390165220330
4 in4.44120220294440
5 in5.56150275367550
6 in6.67180330440660
8 in8.89240440587880

Bag counts include 10% extra for spillage and uneven ground. Cubic yards and cubic feet are the exact volume.

How it’s worked out

  1. Convert the thickness to feet: 4 in ÷ 12 = 0.333 ft.
  2. Multiply length × width × thickness: 36 × 10 × 0.333 = 120 cu ft.
  3. Divide by 27 for cubic yards: 120 ÷ 27 = 4.444 cu yd.
  4. Add 10% and divide by the bag yield: 132 ÷ 0.6 = 220 bags of 80 lb mix (rounded up).

Under the slab, plan on 4 inches of compacted gravel: about 4.44 cubic yards. For driveways and anything that carries a vehicle, go to 5 or 6 inches and add rebar or wire mesh.

Change the numbers

Concrete needed

4.44 cubic yards

120 cubic feet. With 10% extra, order 4.89 yards or 220 bags of 80 lb mix.

Area360 sq ft
Volume120 cu ft (4.44 cu yd)
80 lb bags220 (about $1,430)
60 lb bags294
40 lb bags440
Ready-mix to order5 yd (about $825 before delivery fees)
Weight of the slab8.7 tons

Other slab sizes

Questions

How many bags of concrete do I need for a 10×36 slab?
At 4 inches thick, a 10×36 slab takes 220 bags of 80 lb concrete mix, 294 bags of 60 lb mix or 440 bags of 40 lb mix, including 10% extra.
How many yards of concrete for a 10×36 slab?
4.44 cubic yards at 4 inches thick, 5.56 at 5 inches and 6.67 at 6 inches, before adding extra for waste.
How much does a 10×36 concrete slab cost?
The concrete alone for a 4 inch 10×36 slab costs about $1,430 in 220 bags of 80 lb mix (at about $7 a bag) or about $825 for 5 yards of ready-mix (at about $165 a yard, before delivery fees). Professionally poured slabs usually run $6 to $12 per square foot, about $2,160 to $4,320 for 360 sq ft.
How much does a 10×36 slab weigh?
About 8.7 tons at 4 inches thick (concrete weighs about 145 lb per cubic foot).

Related calculators